Posted by on Oct 18, 2012 in Urethane Foam Removers | Comments Off

foam off mp logoFOAM OFF MP 1 AND 5 GAL AND WIPES


FOAM OFF | MP™  Flexible & Rigid Polyurethane Foam Cleaner Is an environmentally sensible, non-HAPs solvent based cleaner designed to dissolve  &  flush flexible, rigid, elastomer or molded polyurethane foam.  Effective for both MDI and TDI esters as well as cured reactive hot melt polyurethane adhesives, and other industrial adhesives. It cleans hoses,  build up of mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam curing devices, holding tanks, feeding lines and  mixing equipment.

FOAM OFF | MP  effectively removes

  • Cured Urethane Foam deposits
  • Flexible & Rigid Polyurethane Foam
  • Urethane and Industrial Adhesives

Industries Served

  • Foam Manufacturing
  • Fabricating Converting
  • Technical Packaging
  • Automotive
  • Aerospace
  • Industrial
  • Construction
  • Medical
  • Sports & Leisure




                FOAM OFF | MP™  Does NOT Contain Raw Materials listed on the following;

¶ NJ Community Right to Know Environmental Hazardous Substance (EHS) List

¶ SARA Title 313

¶ State of California (Prop 65) to cause cancer, birth defects or other reproductive harm

¶ Section 112(b) of Hazardous Air Pollutants (HAPs)

¶ REACH Annex

¶ Does not contain Ozon Depleting Chemicals

¶ REPLACES solvents such as NMP, BLO, Acetone, MEK, Methylene Chloride, and 1,1,1-Trichloroethane

 Features & Benefits


¶ Low VOC

¶ High resin/polymer loading – can be used for an extended period

¶ Recyclable via vacuum distillation- resulting in reduced disposal costs

¶ Residue free – No Rinsing required

¶ Due to its low vapor pressure and high boiling point  – it  evaporates 237 times slower than Acetone and MEK;  600 times slower than  Methylene Chloride.  Therefore, whatever quantity you purchase, you will use and not loose to evaporation.

 Direction for Use

  • Immersion Cleaning – Use at room temperature OR heated to a maximum 140°F in a well-ventilated area (when heated, a faster polymer and resin removal result is obtained).
  • Flushing the Spray Foam Equipment – Must be used at room temperature only (do not add water).

For more difficult cleaning applications (aged & cured foam) use CIRR D-Bond™ Crystalized Isocyanate Resin Remover in an immersion cleaning tank.  For surface cleaning, GO GREEN Saturated Wipes can be used.


Environmental Compliance Letter  (read more)


|Download Tech Data Sheet  | Request SDS |



1 Gallon EasyPour Jugs / 5 Gallon Pails / 55 Gallon Steel Drums (closed cap)

GO GREENWipes in an “Easy Carry Bucket” (90 12 ” x 12″ ) Polypropylene Saturated Wipes