Posted by on Jun 18, 2012 in Resin Removers, Urethane Foam Removers | Comments Off



GLOBE KLEEN | 2002 ™ Viscous Resin Remover & Isocyanates & Polyurethane Foam Cleaner is a mixture of organic solvents, wetting agents and a corrosion inhibitor.  It easily adheres to vertical and horizontal substrates.

Effectively Removes:

 ¶ Cured urethane foam deposits and build-up from mixing heads, troughs, conveyor parts, side walls, floors, rollers, foam cutting devices and molds.

 ¶ Polyurethane Foam (Reacted Part A & B), Flexible & Rigid Polyurethane Foam, both MDI and TDI esters and ethers, Cured Polyurethane Reactive Hot Melt Urethane Adhesives from roll coating equipment & dispensing equipment, as well as, many other Industrial adhesives.

 ¶ Polyols, crystallized isocyanates, and other urethane intermediates.

 ¶ Industrial Resins such as: Polyester, Vinylester, Epoxy and Pigmented Gel Coats, as well as, Fiberglass and Resin Mixture.

 ¶ Coatings such as:  High & Low Solid Aliphatic, Water Born Epoxy Primers, Polyurethane,  Acrylic, Varnishes and Alkyl Enamel.



 GLOBE  KLEEN | 2002™ DOES NOT contain raw materials on the following lists;

  • State of California (Prop 65) to cause cancer, birth defects or other reproductive harm
  • Section 112(b) of Hazardous Air Pollutants (HAPs)
  • REACH Annex
  • SARA Title 313
  • Does Not contain Ozon Depleting Chemicals
  • NJ Community Right to Know Environmental Hazardous Substance (EHS) List
  • section 112(b) of Hazardous Air Pollutants (HAPs)
  • REPLACES solvents such as NMP, BLO, Acetone, PM Acetate, MEK, Methylene Chloride, and 1,1,1-Trichloroethane

Features & Benefits 

¶ Low VOC

¶ Resin loading – can be used for an extended period

¶ Non-corrosive

¶ Due to its low vapor pressure and high boiling point  – it  evaporates 237 times slower than Acetone and MEK;  600 times slower than  Methylene Chloride.  Therefore, whatever

       quantity you purchase, you will use and not loose to evaporation.


Direction for Use

Use Full Strength (do not add water) at Room Temperature by BRUSH or ROLLER.  Once soils are dissolved, scrape off.  Parts can be wiped with a damp cloth.  Use Natural Rubber Gloves when

handling this productDo not Heat or Atomize this product.   

Environmental Compliance Letter  (read more)

Download Tech Data Sheet | Request SDS |