SURF A LUBE™ – Equipment Storage Fluid – Non Reactive

Posted by on Jan 10, 2021 in News, Resin Removers, Urethane Foam Removers | Comments Off

 Non-reactive with Isocyanates, Polyol and other polymers, resins and coatings



SurfaLube Equipment Storage Fluid is used in urethane dispensing  equipment when stored for an extended period (up to 36 months)

Once the hoses and polyurethane spray equipment are thoroughly flushed with NZD ISO FLUSH™ Isocyanate Cleaner, SurfaLube  is introduced to the equipment through the hoses and spray lines. This helps eliminate formation of crystallized Isocyanates that may form when any remaining residue reacts with moisture in the air.

How to Prepare the System for Storage

Hoses & Lines

  1.  Flush thoroughly with NZD ISO FLUSH™ Isocyanate Neutralizer to remove all liquid and semi-liquid Isocyanate (Part A).
  2. During Flushing, make sure the heaters on the machine are turned off.


  1. Flush Spray Guns thoroughly with SURF X FLUSH 2000 ™ to remove most uncured and cured polyurethane.


  1.  Pump SurfaLube   into the system so that it remains in hoses and lines.
  2. Store unit in a cool and dry (moisture free) area for up to 36 months.
  3. When starting up the unit, flush out SurfaLube   completely!
  4. Introduce Polyurethane into the unit (The first few pounds of Part A & B sprayed through the system should be scrapped to avoid any adhesive failure.
  5. Then you are Ready toGo!


 | Download Tech Data Sheet | Request SDS


  • VOC  Exempt
  • Non Flammable
  • Non Corrosive
  • Recyclable
  • Non Ozone Depleting
  • Non-Hydroscopic
  • No ODC’s
  • Stable under normal storage conditions
  • Biodegradable
  • Mild odor
  • Compatible with machines & transfer pumps made of Carbon Steel or Stainless Steel & Aluminum Alloys


  • 4 x 1 Gallon EasyPour Jug
  • 5 Gallon
  • 55 Gallon Steel Drums