FOAM OFF ǀ MP™ Flexible & Rigid Polyurethane Foam Remover
FOAM OFF | MP™ Flexible & Rigid Polyurethane Foam Remover for Immersion Cleaning and Flushing
Flushing and removing large amounts of liquid and hardened Isocyanate (A) from ISO lines and feed lines, including metering equipment, mixing heads, hoses, kettles, pump packaging, etc.
Purchased by Manufacturers of:
- Foam sheathing insulation for building and construction material, as well as roof and wall insulation, insulated windows, doors, and air barrier sealants
- Flexible Polyurethane Foam
- TDI Toluene Diisocyanate
- MDI methylene diphenyl diisocyanate; including all three isomers 2,2'-MDI, 2,4'-MDI, and 4,4'-MDI (4,4'-diphenylmethane diisocyanate)
- Rigid Polyurethane Foam
- Polyisocyanurate (Polyiso)
- Extruded Polystyrene (XPS)
- Expanded Polystyrene (EPS)
- Cushioning Industries
- Upholstered furniture, Beds, and Mattresses
- Entry Garage doors (laminated with wood)
- Carpet Cushion
- Automotive Seating, Armrests, and Headliners
- Apparel Padding, Shoe Insoles
- Filtration
- Packaging
- Insulated Panels and Doors
- Marine and Transportation
- Building and Construction
- Tank and Pipe
How to Apply, Packaging, Materials Compatibility
Review TDS:
- Apply full strength at 77 – 140°F (via pump recirculation, immersion, or low-pressure spray)
- Immersion Cleaning – Use at room temperature OR heated to a maximum of 140°F in a well-ventilated area (when heated, a faster polymer and resin removal result is obtained).
- Flushing the Spray Foam Equipment – Must be used at room temperature only (do not add water)
- Safe and compatible with most O-rings, gaskets, rubber seals, and all metals
- Available in 1-gallon Easy Pour Jugs, 5-gallon Pails, 55-gallon Drums, and GO GREEN ™ Saturated Wipe
Environmental:
- "ECO-friendly, non-HAPs, non-flammable, recyclable and non-corrosive."
- None of the ingredients are listed on CA PROP 65 or EPA HAPS
- Ideal replacement for Methylene Chloride, MEK, N-Methyl-2-Pyrrolidone "NMP-based formulations."
