SurfaLube™ Equipment Storage Fluid
- VOC Exempt
- Plasticizer
- Stable does not freeze under severe cold environments (<-94 °F)
- Winterizing and Maintenance of your Polyurethane & Polyurea Spray Equipment
- Long-term Storage of Urethane & Coating Dispensing Equipment, Spray Guns, and Hoses
SurfaLube™ Equipment Storage Fluid is a product specifically designed for mid to long-term storage (up to 36 months) of Urethane Dispensing and Polyurea Spray Equipment. Its primary function is to prevent the formation of Isocyanate Polymers from crystallizing by acting as a plasticizer. This makes the polymers flexible and soft, and helps to avoid the formation of isocyanate crystals inside transfer pumps, hoses, proportioners, and guns. It is ideal for winterizing your rigs and can withstand severe cold environments without freezing. The freezing point of SurfaLube™ is as low as -70 °C (-94 °F).
SurfaLube™ is a high-performance lubricant that comes with an excellent environmental profile. It can be stored easily under normal conditions and is compatible with various types of machines and transfer pumps, including those made of Carbon Steel, Stainless Steel, and Aluminum alloy. This lubricant is gentle on most O-rings, gaskets, seals, and lining. Additionally, it does not freeze in a frigid environment (below -94 °F).
After thoroughly flushing the hoses and polyurethane spray equipment, SurfaLube™ needs to be introduced to the equipment through the spray line. This helps prevent the formation of Polyurea and Crystallized Isocyanates that might result from the remaining residue reacting with moisture in the air.
Eliminate disposal costs by recycling the spent SurfaLube™ via Vacuum Distillation.
A companion product to:
- NZD ISO FLUSH™ Isocyanates Cleaner & Neutralizer
- SURF X™ FLUSH 2000 Polyurethane Foam, Resin & Coating Remover
Purchased by:
- All Industries
- Contractors of Spray Foam and Coatings
- Manufacturers of Diisocyanate Polymers, Coatings, and Adhesives
- OEM & Transpiration, Consumer - Automotive, Aerospace, Injection Mold, Foam sheathing insulation and Cushioning, DOT
- Printing Lithographic, Flexographic, Gravure, Screen, Packaging, and other commercial printers.
- Boat and Yacht Manufacturers, Marine, U.S. Navy, Injection Mold, Cultured Marble, etc.
How to Apply, Packaging, Materials Compatibility:
Review TDS
- Use full strength at room temperature
- Safe and compatible with most O-rings, gaskets, rubber seals, and metal
- Available in 1-gallon Easy Pour jugs, 5-gallon pails, and 55-gallon drums
Environmental:
- ECO Friendly, non-HAPs, non-Flammable, Recyclable, non-Corrosive
- None of the ingredients are listed on CA Proposition 65 or EPA Hazardous Air Pollutants List.
- Alternative to Phthalate-Phenol compounds
